How to deal with the loose belt of Jingzhou generator set
As the demand for generators increases, there will be some problems during this operation. For example, a friend asked what is the problem when the generator sometimes makes a sound when the belt is running. As a generator manufacturer, we will analyze and solve some problems for everyone. If you have encountered this problem, let's take a look together.
In this case, the generator belt sounds because the generator belt operation drives many accessories, including generators, water pumps, air-conditioning compressors, power steering pumps, and so on. The generator belt is a rubber product. It will become longer when used for a long time, which will cause the belt tension to become loose. In this way, the belt will "lost" after the engine is running, and friction will occur between the belt and the accessories to drive.
The heat generated by the friction of the belt for a period of time will increase the viscosity of the rubber, so it will not sound again after a while. However, this situation must be ruled out in time. If the belt is often rubbed in this way, it will accelerate the belt aging, causing a sudden breakage in the middle and causing the vehicle to break down; more serious is that the engine may have a serious accident.
Because the transmission of the generator belt drives the water pump at the same time, if the belt breakage is not detected in time, the engine will quickly heat up, and a boiler accident will occur. At the same time, if the belt driving the power steering pump is broken, the steering will suddenly lose power and become very heavy. If an emergency situation occurs at this time, the driver may not be able to steer in time to avoid accidents.
Therefore, when there is a sound of the belt, it should be repaired in time to prevent accidents. Previously, generator belts could be tightened and tightened, which is usually tight. However, after tightening the belt many times, it will reach the limit of use, so it is necessary to replace the generator belt in time according to the use of your car. Most of the current belts are automatically tightened. If this happens, the belts should be replaced in time.
The above is a brief introduction on how to deal with the loose belt of the generator set. I hope this knowledge will help you!
Hardware design and software of generator set monitoring system
1000KW Jichai generator set
50KW Shangchai generator set
Factors to consider when purchasing generator sets and their performance and quality
- T2-400kw Yuchai generator set
- 68KW Volvo generator set
- What are the components and functions of diesel generators? 2019-12-19
- Can the three-phase generator wiring diagram lead to only one phase ?
- Start-up steps of automatic diesel generator2019-12-05
- What is the reason for the small diesel generators to emit black smoke?
- What is the reason for ` ` maintenance '' diesel generators not catching fire?
- Maintenance tips and cleaning points for generators2019-10-26
- Introduction to the structure and characteristics of silent diesel generators2019-10-16
- Diesel generator wire grounding and UPS matching instructions2019-09-24